Filter
Top Products
3, the SCSI ID is 2. If it is installed in slots 3, 4, and 5, the SCSI ID is
4. Figure 8–3 shows a view of the DS-TZ89N-VW showing the backplane
interface connector and SCSI ID switch pack.
Figure 8–3: DS-TZ89N-VW SCSI ID Switches
Snap−in
Locking
Handles
SCSI ID
Switch Pack
Backplane
Interface
Connector
DS−TZ89N−VW
The SCSI ID is selected by switch positions, which must be selected before
the tape drive is installed in the BA356. Table 8–2 shows the switch settings
for the DS-TZ89N-VW.
Table 8–2: DS-TZ89N-VW Switch Settings
SCSI ID SCSI ID Selection Switches
12345678
Automatic
a
Off Off Off Off On On On On
0
Off Off Off Off Off Off Off Off
1
On Off Off Off Off Off Off Off
8–6 Configuring a Shared SCSI Bus for Tape Drive Use