Filter
Top Products
# hwmgr -get attribute -a name -a dev_base_name
| more
Use the more search utility (/) to search for the worldwide
name of the storageset you have set up for the particular
disk in question. The following example shows the format of
the command output:
# hwmgr -get attribute -a name -a dev_base_name
1:
name = Compaq AlphaServer ES40
2:
name = CPU0
.
.
.
62:
name = SCSI-WWID:01000010:6000-1fe1-0000-0d60-0009-8080-0434-002e
dev_base_name = dsk15
63:
name = SCSI-WWID:01000010:6000-1fe1-0000-0d60-0009-8080-0434-0030
dev_base_name = dsk16
64:
name = SCSI-WWID:01000010:6000-1fe1-0000-0d60-0009-8080-0434-002f
dev_base_name = dsk17
65:
name = SCSI-WWID:01000010:6000-1fe1-0000-0d60-0009-8080-0434-0028
dev_base_name = dsk18
66:
name = SCSI-WWID:01000010:6000-1fe1-0000-0d60-0009-8080-0434-002b
dev_base_name = dsk19
67:
name = SCSI-WWID:01000010:6000-1fe1-0000-0d60-0009-8080-0434-002a
dev_base_name = dsk20
68:
name = SCSI-WWID:01000010:6000-1fe1-0000-0d60-0009-8080-0434-0029
dev_base_name = dsk21
69:
name = SCSI-WWID:0710002c:"COMPAQ CDR-8435 :d05b003t00000l00000"
dev_base_name = cdrom0
.
.
.
For more information on the hardware manager (hwmgr),
see hwmgr
(8).
2. Search the display for the UDIDs (or worldwide names) for each of the
cluster installation disks and record the /dev/disk/dskn values.
If you used the grep utility to search for a specific UDID, for example
hwmgr -view dev | grep "IDENTIFIER=131" repeat the command
to determine the /dev/disk/dskn for each of the remaining cluster
disks. Record the information for use when you install the cluster
software.
6–52 Using Fibre Channel Storage