Filter
Top Products
6.12
Using the emx Manager to Display Fibre Channel Adapter
Information ............................................................
6–59
6.12.1
Using the emxmgr Utility to Display Fibre Channel
Adapter Information .............................................
6–59
6.12.2
Using the emxmgr Utility Interactively ...................... 6–61
7 Preparing ATM Adapters
7.1
ATM Overview ........................................................
7–1
7.2
Installing ATM Adapters ............................................
7–3
7.3
Verifying ATM Fiber Optic Cable Connectivity .................. 7–4
7.4
ATMworks Adapter LEDs ........................................... 7–6
8 Configuring a Shared SCSI Bus for Tape Drive Use
8.1
Preparing the TZ88 for Shared Bus Usage ....................... 8–1
8.1.1
Setting the TZ88N-VA SCSI ID ............................... 8–2
8.1.2
Cabling the TZ88N-VA .......................................... 8–3
8.1.3
Setting the TZ88N-TA SCSI ID ............................... 8–4
8.1.4
Cabling the TZ88N-TA .......................................... 8–4
8.2
Preparing the TZ89 for Shared SCSI Usage ...................... 8–5
8.2.1
Setting the DS-TZ89N-VW SCSI ID .......................... 8–5
8.2.2
Cabling the DS-TZ89N-VW Tape Drives ..................... 8–7
8.2.3
Setting the DS-TZ89N-TA SCSI ID ........................... 8–8
8.2.4
Cabling the DS-TZ89N-TA Tape Drives ...................... 8–8
8.3
Compaq 20/40 GB DLT Tape Drive ................................ 8–9
8.3.1
Setting the Compaq 20/40 GB DLT Tape Drive SCSI ID .. 8–9
8.3.2
Cabling the Compaq 20/40 GB DLT Tape Drive ............. 8–10
8.4
Preparing the TZ885 for Shared SCSI Usage .................... 8–13
8.4.1
Setting the TZ885 SCSI ID .................................... 8–13
8.4.2
Cabling the TZ885 Tape Drive ................................ 8–13
8.5
Preparing the TZ887 for Shared SCSI Bus Usage ............... 8–15
8.5.1
Setting the TZ887 SCSI ID .................................... 8–15
8.5.2
Cabling the TZ887 Tape Drive ................................ 8–16
8.6
Preparing the TL891 and TL892 DLT MiniLibraries for
Shared SCSI Usage ................................................... 8–18
8.6.1
Setting the TL891 or TL892 SCSI ID ......................... 8–18
8.6.2
Cabling the TL891 or TL892 MiniLibraries ................. 8–20
8.7
Preparing the TL890 DLT MiniLibrary Expansion Unit ....... 8–23
8.7.1
TL890 DLT MiniLibrary Expansion Unit Hardware ....... 8–24
8.7.2
Preparing the DLT MiniLibraries for Shared SCSI Bus
Usage .............................................................. 8–24
Contents vii