Filter
Top Products
Example 6–1: Determine HSG80 Connection Names (cont.)
HOST_ID=1000-0000-C921-086C ADAPTER_ID=1000-0000-C921-086C
!NEWCON63 TRU64_UNIX OTHER 1 offline 0
HOST_ID=1000-0000-C921-0943 ADAPTER_ID=1000-0000-C921-0943
!NEWCON64 TRU64_UNIX OTHER 1 210413 OL other 0
HOST_ID=1000-0000-C920-EDA0 ADAPTER_ID=1000-0000-C920-EDA0
!NEWCON65 TRU64_UNIX OTHER 2 210513 OL other 0
HOST_ID=1000-0000-C921-086C ADAPTER_ID=1000-0000-C921-086C
.
.
.
!NEWCON74 TRU64_UNIX THIS 2 210413 OL this 0
HOST_ID=1000-0000-C920-EDA0 ADAPTER_ID=1000-0000-C920-EDA0
!NEWCON75 TRU64_UNIX THIS 2 offline 0
HOST_ID=1000-0000-C921-0A75 ADAPTER_ID=1000-0000-C921-0A75
!NEWCON76 TRU64_UNIX THIS 1 210413 OL this 0
HOST_ID=1000-0000-C920-EDA0 ADAPTER_ID=1000-0000-C920-EDA0
!NEWCON77 TRU64_UNIX THIS 1 210513 OL this 0
HOST_ID=1000-0000-C921-086C ADAPTER_ID=1000-0000-C921-086C
!NEWCON78 TRU64_UNIX THIS 2 offline 0
HOST_ID=1000-0000-C920-CB77 ADAPTER_ID=1000-0000-C920-CB77
!NEWCON79 TRU64_UNIX OTHER 1 offline 0
HOST_ID=1000-0000-C920-CB77 ADAPTER_ID=1000-0000-C920-CB77
.
.
.
____________________ Note _____________________
You can change the connection name with the HSG80 CLI
RENAME command. For example, assume that member
system pepicelli has two KGPSA Fibre Channel host
bus adapters, and that the worldwide name for KGPSA
pga is 1000-0000-C920-DA01. Example 6–1 shows that
the connections for pga are !NEWCON49, !NEWCON50,
!NEWCON54, and !NEWCON56. You could change the name of
!NEWCON49 to indicate that it is the first connection (of four)
to pga on member system pepicelli as follows:
HSG80> rename !NEWCON49 pep_pga_1
13. For each connection to your cluster, verify that the operating system is
TRU64_UNIX and the unit offset is 0. Search the show connection
display for the worldwide name of each of the KGPSA adapters in
6–30 Using Fibre Channel Storage