Filter
Top Products
6.2.2.2
Fabric .........................................................
6–6
6.2.2.3
Arbitrated Loop Topology ..................................
6–7
6.3
Example Fibre Channel Configurations Supported by
TruCluster Server .....................................................
6–8
6.3.1
Fibre Channel Cluster Configurations for Transparent
Failover Mode .....................................................
6–8
6.3.2
Fibre Channel Cluster Configurations for Multiple-Bus
Failover Mode .....................................................
6–10
6.4
Zoning and Cascaded Switches ..................................... 6–13
6.4.1
Zoning ..............................................................
6–13
6.4.2
Cascaded Switches ...............................................
6–14
6.5
Installing and Configuring Fibre Channel Hardware ........... 6–15
6.5.1
Installing and Setting Up the Fibre Channel Switch ...... 6–15
6.5.1.1
Installing the Switch ........................................ 6–16
6.5.1.2
Managing the Fibre Channel Switches .................. 6–17
6.5.1.2.1
Using the Switch Front Panel ........................ 6–17
6.5.1.2.2
Setting the Ethernet IP Address and Subnet Mask
from the Front Panel ................................... 6–18
6.5.1.2.3
Setting the DS-DSGGB-AA Ethernet IP Address
and Subnet Mask from a PC or Terminal ........... 6–20
6.5.1.2.4
Logging Into the Switch with a Telnet Connection 6–20
6.5.1.2.5
Setting the Switch Name via Telnet Session ....... 6–21
6.5.2
Installing and Configuring the KGPSA PCI-to-Fibre
Channel Adapter Module ....................................... 6–22
6.5.2.1
Installing the KGPSA PCI-to-Fibre Channel Adapter
Module ........................................................
6–22
6.5.2.2
Setting the KGPSA-BC or KGPSA-CA to Run on a
Fabric ......................................................... 6–23
6.5.2.3
Obtaining the Worldwide Names of KGPSA Adapters 6–25
6.5.3
Setting up the HSG80 Array Controller for Tru64 UNIX
Installation ........................................................ 6–26
6.5.3.1
Obtaining the Worldwide Names of HSG80 Controller 6–31
6.6
Preparing to Install Tru64 UNIX and TruCluster Server on
Fibre Channel Storage ............................................... 6–33
6.6.1
Configuring the HSG80 Storagesets .......................... 6–33
6.6.2
Setting the Device Unit Number .............................. 6–40
6.6.3
Setting the bootdef_dev Console Environment Variable ... 6–46
6.7
Install the Base Operating System ................................ 6–48
6.8
Resetting the
bootdef_dev Console Environment Variable .. 6–49
6.9
Determining /dev/disk/dskn to Use for a Cluster Installation . 6–51
6.10
Installing the TruCluster Server Software ....................... 6–53
6.11
Changing the HSG80 from Transparent to Multiple-Bus
Failover Mode ......................................................... 6–54
vi Contents