Filter
Top Products
106 Removing and Installing Parts
3
If your replacement hard drive does not have the hard drive bracket attached, remove the bracket from
the old hard drive by unsnapping it from the drive.
4
Snap the hard drive bracket onto the replacement hard drive.
5
Install the hard drive into the computer by sliding the drive into place until you feel it click into place.
6
Connect the power and hard drive cables to the hard drive.
7
Check all connectors to be certain that they are properly cabled and firmly seated.
8
Replace the computer cover.
1 hard drive 2 hard drive bracket
1 power cable 2 hard drive cable
1
2
2
1