Filter
Top Products
110 Removing and Installing Parts
Installing a Floppy Drive
1
If you are installing a new floppy drive, remove the shoulder screws from the inside of the drive-panel
insert and attach the screws to the new drive.
2
Slide the floppy drive into the floppy drive bay until the sliding plate clicks into place and the drive
snaps into position.
3
Attach the power and floppy-drive cables to the floppy drive.
4
Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling
vents.
5
Replace the computer cover.
NOTICE: To connect a network cable, first plug the cable in to the network wall jack and then plug it in to the
computer.
6
Connect your computer and devices to their electrical outlets, and then turn them on.
See the documentation that came with the floppy drive for instructions on installing any software
required for the operation of the drive.
7
Enter system setup (see "System Setup" on page 125) and select the appropriate
Diskette Drive
option.
8
Verify that your computer works correctly by running the Dell Diagnostics (see "Dell Diagnostics" on
page 68).
1 floppy drive 2 shoulder screws (4)
1
2