Filter
Top Products
114 Removing and Installing Parts
7
Connect the FlexBay USB cable to the back of the Media Card Reader and to the Media Card Reader
connector on the system board (see "System Board Components" on page 81).
8
Insert the Media Card Reader into the bay and slide the drive in to seat it in the computer.
9
Route the USB cable through the cable routing clip.
10
Replace the computer cover (see "Replacing the Computer Cover" on page 119).
CD/DVD Drive
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product
Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before
opening the cover.
1 Media Card Reader (not
present on all computers)
2 USB cable
2
1