Filter
Top Products
112 Removing and Installing Parts
5
Disconnect the USB cable on the back of the Media Card Reader to the front panel USB connector on
the system board (see "System Board Components" on page 81) and route the cable through the clip
on the shroud.
6
While pushing on the back of the drive, remove the Media Card Reader by sliding and holding the
sliding plate.
7
Replace the drive panel (see "Replacing the Drive Panel" on page 103).
8
Replace the computer cover (see "Replacing the Computer Cover" on page 119).
1 sliding plate 2 sliding plate lever 3 Media Card Reader (not
present on all computers)
3
1
2