Dell 9200 Network Card User Manual


 
66 Troubleshooting Tools
Memory modules are detected, but a
memory failure has occurred.
If two or more memory modules are
installed, remove the modules (see
"Removing Memory" on page 85), then
reinstall one module (see "Installing
Memory" on page 83) and restart the
computer. If the computer starts
normally, continue to install additional
modules (one at a time) until you have
identified a faulty module or
reinstalled all modules without error.
If available, install properly working
memory of the same type into your
computer (see "Installing Memory" on
page 83).
If the problem persists, contact Dell
(see
"Contacting Dell" on page 135
).
A possible graphics card failure has
occurred.
Reseat any installed graphics card (see
"Cards" on page 86).
If available, install a working graphics
card into your computer.
If the problem persists, contact Dell
(see
"Contacting Dell" on page 135
).
A possible floppy drive or hard drive
failure has occurred.
Reseat all power and data cables.
A possible USB failure has occurred. Reinstall all USB devices and check all
cable connections.
Light Pattern Problem Description Suggested Resolution