Dell Command Line Interface Network Card User Manual


 
Using the Storage Management Service 145
Example Syntax
The omconfig command syntax for enabling thermal shutdown does not require that you specify a
controller or enclosure ID. To enable thermal shutdown, enter the following:
omconfig storage globalinfo action=enablests
NOTE: You can use the omreport storage globalinfo command to determine whether smart thermal shutdown is
currently enabled or disabled. The status of smart thermal shutdown is also displayed by the Server Administrator
graphical user interface. To locate this status, select the Storage object and the Information/Configuration tab.
omconfig Global Disable Smart Thermal Shutdown
If you have previously enabled smart thermal shutdown using the omconfig command, you can disable
smart thermal shutdown and return the system to its default setting. When smart thermal shutdown is
disabled, the operating system and the server will shut down when the PV220S and PV221S enclosures
reach a critical temperature of 0 or 50
° Celsius.
Use the following omconfig command syntax to disable smart thermal shutdown. This command will
disable smart thermal shutdown for all controllers.
Complete Syntax
omconfig storage globalinfo action=disablests
Example Syntax
The omconfig command syntax for disabling thermal shutdown does not require that you specify a
controller or enclosure ID. To disable thermal shutdown, enter the following:
omconfig storage globalinfo action=disablests
NOTE: You can use the omreport storage globalinfo command to determine whether smart thermal shutdown is
currently enabled or disabled. The status of smart thermal shutdown is also displayed by the Server Administrator
graphical user interface. To locate this status, select the Storage object and the Information/Configuration tab.
omconfig Global Rescan Controller
Use the following omconfig command syntax to rescan all controllers on the system. See the online help
for more information about using this command.
Complete Syntax
omconfig storage globalinfo action=globalrescan