Dell Command Line Interface Network Card User Manual


 
160 Using the Storage Management Service
where id is the controller ID and virtual disk ID as reported by the omreport command. To obtain these
values, enter omreport storage controller to display the controller IDs and then enter omreport storage
vdisk controller=ID to display the IDs for the virtual disks attached to the controller.
Example Syntax
For example, to blink the physical disks in virtual disk 4 on controller 1, enter:
omconfig storage vdisk action=unblink controller=1 vdisk=4
omconfig Initialize Virtual Disk
Use the following omconfig command syntax to initialize a virtual disk.
Complete Syntax
omconfig storage vdisk action=initialize controller=id vdisk=id
where id is the controller ID and virtual disk ID as reported by the omreport command. To obtain these
values, enter omreport storage controller to display the controller IDs and then enter omreport storage
vdisk controller=ID to display the IDs for the virtual disks attached to the controller.
Example Syntax
For example, to initialize virtual disk 4 on controller 1, enter:
omconfig storage vdisk action=initialize controller=1 vdisk=4
omconfig Cancel Initialize Virtual Disk
Use the following omconfig command syntax to cancel the initialization of a virtual disk.
Complete Syntax
omconfig storage vdisk action=cancelinitialize controller=id vdisk=id
where id is the controller ID and virtual disk ID as reported by the omreport command. To obtain these
values, enter omreport storage controller to display the controller IDs and then enter omreport storage
vdisk controller=ID to display the IDs for the virtual disks attached to the controller.
Example Syntax
For example, to cancel the initialization of virtual disk 4 on controller 1, enter:
omconfig storage vdisk action=cancelinitialize controller=1 vdisk=4
omconfig Fast Initialize Virtual Disk
Use the following omconfig command syntax to fast initialize a virtual disk.