Dell Command Line Interface Network Card User Manual


 
44 omreport: Viewing System Status Using the Instrumentation Service
omreport system platformevents
Use the omreport system platformevents command to view how the system responds for each listed
platform event.
omreport system recovery
Use the omreport system recovery command to see whether there is an action configured for a hung
operating system. You can also view the number of seconds that must elapse before an operating system
is considered to be hung.
omreport system shutdown
Use the omreport system shutdown command to view any pending shutdown actions for your system.
If properties for shutdown are configured, executing this command displays them.
omreport system summary
Use the omreport system summary command to view a comprehensive summary of software and
hardware components currently installed on your system.
Destination Number: Destination 3
Destination IP Address: 201.202.203.204
destination 3: Displays the third
destination.
201:202:203:204: IP address of the third
destination.
Destination Number: Destination 4
Destination IP Address: 210.211.212.213
destination 4: Displays the fourth
destination.
210.211.212.213: IP address of the fourth
destination.
Destination
Configuration
Settings
attribute=communitystring communitystring: Displays the text
string that acts as a password and is used
to authenticate SNMP messages sent
between the baseboard management
controller (BMC) and the destination
management station.
Table 3-7. omreport system pedestinations (continued)
Output Attributes Description