Filter
Top Products
22 omreport: Viewing System Status Using the Instrumentation Service
Table 3-1 is a high-level summary of the omreport command. The column titled "Command level 1"
shows the omreport command at its most general. "Command level 2" shows the major objects or
components that you can view using omreport (about, chassis, storage, system, and rac). "Command
level 3" lists the specific objects and components for which you can view reports. "User privilege required"
refers to the type of privilege you need to perform the command, where U=User, P=Power User, and
A=Administrator. "Use" is a very general statement about the actions that can be performed using
omreport. More details about syntax and use of the command appear later in this section.
Table 3-1 shows the omreport commands available for about, system, and main system chassis.
For information about viewing storage components, see "omreport: Viewing System Status Using
the Instrumentation Service."
Table 3-1. omreport Command Level 1, Level 2, and Level 3
Command
level 1
Command
level 2
Command
level 3
User
privilege
required
Use
omreport
about U, P, A Shows version number and properties for the
Server Administrator program.
details=true U, P, A Displays information for all of the Server
Administrator programs that are installed.
chassis U, P, A Shows a general status for all main components.
acswitch U, P, A Shows failover settings where redundant AC
power lines are supported in a system.
batteries U, P, A Shows properties set for batteries.
bios U, P, A Shows BIOS facts such as manufacturer, version,
and date last updated.
biossetup A Shows BIOS setup properties configured during
system boot.
bmc U, P, A Shows general information on remoteaccess.
NOTE: This subcommand will be phased-out in
future releases. It will be replaced by the
subcommand remoteaccess.
currents U, P, A Shows the status and thresholds for the system
current sensors.
fancontrol U, P, A Shows properties set for fan speed.
fans U, P, A Shows status and thresholds for system fans.
firmware U, P, A Shows firmware properties such as version, date
of last update, and whether the firmware
is updatable.