Filter
Top Products
38 omreport: Viewing System Status Using the Instrumentation Service
omreport chassis slots
Use the omreport chassis slots command to view properties of your system’s slots.
Ty p e :
omreport chassis slots index=
n
The index parameter is optional. If you do not specify the index, Server Administrator displays
properties for all of the slots in your system. If you specify the index, Server Administrator displays
properties for a specific slot.
For each slot in the system, values display for the following fields: Index, Slot ID, Adapter, and
Data Bus Width.
Index is the number of the slot in the system.
Slot ID is the silk screen name printed on your system's motherboard next to the slot. Alphanumeric text
uniquely identifies each slot in the system.
Adapter refers to the name and or type of the card that fits into the slot, for example, a storage array
controller, SCSI adapter, or HBA.
Data bus width is the width, in bits, of the information pathway between the components of a system.
Data bus width range is 16 to 64 bits.
omreport chassis temps
Use the omreport chassis temps command to view properties of your system’s temperature probes.
When you type:
omreport chassis temps index=
n
The index parameter is optional. If you do not specify the index, Server Administrator displays a
summary of status, readings, and thresholds set for any temperature probes that might be present on
your system. If you specify the index, Server Administrator displays a summary for a specific
temperature probe.
Table 3-5. omreport chassis remoteaccess
name=value pair Description
config=advsol Reports advanced BMC or RAC information on a serial over local area
network (LAN) connection.
config=nic Reports BMC or RAC information for the LAN.
config=serial Reports serial port information for BMC or RAC.
config=serialoverlan Reports BMC or RAC information on a serial over LAN connection.
config=terminalmode Reports terminal mode settings for the serial port.
config=user Reports information on BMC or RAC users.