Filter
Top Products
122 Configuring System Information
Displaying System Resources Using CLI Commands
For information about the CLI commands that perform this function, see the
System Management
Commands
chapter in the
CLI Reference Guide
. The following table summarizes the equivalent CLI
commands you use to display system resources information.
Time Zone Configuration
Use the Time Zone Configuration to configure the time zone difference from Coordinated Universal
Time (UTC).
To display the Time Zone Configuration page, click System
→
General
→
Time Zone Configuration in
the tree view.
Figure 6-5. Time Zone Configuration
The Time Zone Configuration page contains the following fields:
•
Hours-offset
— Set the hours difference from UTC. (Range: -12 to +13)
•
Minutes-offset
— Set the minutes difference from UTC. (Range: 0
–
59)
•
Zone
— Set the acronym of the time zone. (Range: 0
–
4 characters)
Defining the Time Zone Parameters
1.
Open the
Time Zone Configuration
page.
2.
Define the
fields as needed.
3.
Click
Apply Changes
.
Table 6-4. System Resources Commands
CLI Command Description
show memory cpu Checks the total and available RAM space on the switch.
show process cpu Checks the CPU utilization for each process currently running on the
switch.