Filter
Top Products
684 Configuring Quality of Service
Changing Diffserv Admin Mode
1.
Open the
Diffserv Configuration
page.
2.
Tu r n
Diffserv Admin Mode
on or off by selecting Enable or Disable from the drop-down menu.
3.
Click
Apply Changes
.
The Diffserv Admin Mode is changed, and the device is updated.
Displaying MIB Tables Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
• QoS Commands
The following table summarizes the equivalent CLI commands for this feature.
Class Configuration
Use the
Diffserv Class Configuration page to add a new Diffserv class name, or to rename or delete an
existing class.
To display the
page, click Quality of Service
→
Differentiated Services
→
Class Configuration in the tree
view.
Table 11-1. DiffServ Configuration Commands
CLI Command Description
diffserv Sets the DiffServ operational mode to active.
show diffserv Displays the DiffServ General Status information.