Filter
Top Products
752 Configuring IP Multicast
•
Up Time (secs)
— Displays the up time since the entry was created in the cache table.
•
State
— The state of the host entry. A host can be in one of the following states:
–
Non-member State
— Does not belong to the group on the interface.
–
Delaying Member State
— Host belongs to the group on the interface and report timer is running.
The report timer is used to send out the reports.
–
Idle Member State
— Host belongs to the group on the interface and no report timer is running.
•
Filter Mode
— The group filter mode (Include/Exclude/None) for the specified group on the IGMP
Proxy interface.
Displaying Detailed IGMP Proxy Interface Membership Info
1.
Open the
IGMP Proxy Interface Membership Info Detailed
page.
2.
Select the interface to display from the
Interface
drop-down menu.
3.
Select the desired
Multicast Group IP
.
Detailed membership data for this interface and multicast group IP displays.
Displaying Detailed IGMP Proxy Interface Membership Info Using CLI Commands
For information about the CLI command that performs this function, see the following chapter in the
CLI Reference Guide:
• IGMP Proxy Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 12-22. IGMP Proxy Interface Membership Detail Commands
CLI Command Description
show ip igmp-proxy interface Displays a detailed list of the host interface status parameters.
show ip igmp-proxy groups detail Displays complete information about multicast groups that IGMP
Proxy has reported.