Filter
Top Products
234 Configuring System Information
Removing a Filter
1.
Open the
Notification Filter
page.
2.
Click
Show All
.
The
Show Notification
page displays.
3.
Select the
Filter Table
entry.
4.
Check
Remove
.
The filter entry is removed, and the device is updated.
Configuring Notification Filters Using CLI Commands
For information about the CLI commands that perform this function, see the
SNMP Commands
chapter
in the
CLI Reference Guide
. The following table summarizes the equivalent CLI commands you use to
configure notification filters.
Notification Recipients
Use the Notification Recipients page
to view information for defining filters that determine whether
traps are sent to specific users, and the trap type sent. SNMP notification filters provide the following
services:
• Identifying Management Trap Targets
•Trap Filtering
• Selecting Trap Generation Parameters
• Providing Access Control Checks
To display the Notification Recipients page, click System
→
SNMP
→
Notification Recipient in the tree
view.
Table 6-45. Notification Filters Configuration Commands
CLI Command Description
show snmp filters Displays the configuration of filters.
snmp-server filter Creates or updates an SNMP server filter entry.