Filter
Top Products
Configuring Switching Information 383
3.
Specify the Port or LAG you are copying from in
Copy Parameters From
.
4.
Click
Copy To
for each Interface/LAG to receive these parameters.
5.
Click
Apply Changes
.
The GVRP Port Parameter settings are copied, and the device is updated.
Modifying GVRP Parameters for Multiple Ports
1.
Open the
GVRP Global Parameters
page.
2.
Click
Show All
.
The
GVRP Port Parameters Table
displays.
3.
Click
Edit
for each Interface/LAG to modify.
4.
Edit the GVRP Port Parameter fields as needed.
5.
Click
Apply Changes
.
The GVRP Port Parameter settings are modified, and the device is updated.
Configuring GVRP Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• GVRP Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 7-32. GVRP Commands
CLI Command Description
clear gvrp statistics Clears all the GVRP statistics information.
garp timer Adjusts the GARP application join, leave, and leaveall GARP timer
values.
gvrp enable (global) Enables GVRP globally.
gvrp enable (interface) Enables GVRP on an interface.
gvrp registration-forbid De-registers all VLANs, and prevents dynamic VLAN registration on
the port.
gvrp vlan-creation-forbid Enables or disables dynamic VLAN creation.
show gvrp configuration Displays GVRP configuration information,
including timer values,
whether GVRP and dynamic VLAN creation is enabled, and
which ports are running GVRP
show gvrp error-statistics Displays GVRP error statistics.
show gvrp statistics Displays GVRP statistics.