Filter
Top Products
Configuring System Information 187
Figure 6-59. RADIUS Accounting Server Status
3.
To remove a named accounting server, select the check box in the
Remove
column.
4.
Click
Apply Changes
.
The RADIUS accounting server is removed from the list.
Configuring RADIUS Accounting Server Settings Using CLI Commands
For information about the CLI commands that perform this function, see the
RADIUS Commands
chapter in the
CLI Reference Guide
. The following table summarizes the equivalent CLI commands you
use.
RADIUS Accounting Server Statistics
Use the RADIUS Accounting Server Statistics page to view statistical information for each RADIUS
accounting server configured on the system.
To access the RADIUS Accounting Server Statistics page, click System
→
Management Security
→
RADIUS
Accounting Server Statistics
in the tree view.
Table 6-32. RADIUS Accounting Server Commands
CLI Command Description
acct-port Sets the port number for the designated radius accounting server.
key Sets the authentication and encryption key for all RADIUS
communications between the switch and the RADIUS daemon.
name Assigns a name to a RADIUS accounting server.
radius-server acct Specifies a RADIUS accounting server host and enter RADIUS Server
Configuration mode.
show radius-servers Displays the RADIUS accounting server settings.