Filter
Top Products
578 Configuring Routing
• IP Routing Commands
The following table summarizes the equivalent CLI commands for this feature.
Best Routes Table
Use the Router Best Routes Table
page to display the best routes from the routing table.
To display the page, click Routing
→
Router
→
Best Routes Table in the tree view.
Figure 9-36. Router Best Routes Table
The Router Best Routes Table page displays the following fields:
•
Total Number of Routes
— The total number of routes in the route table.
•
Network Address
— The IP route prefix for the destination.
•
Subnet Mask
— Also referred to as the subnet/network mask, this indicates the portion of the IP
interface address that identifies the attached network.
•
Protocol
— This field tells which protocol created the specified route. The possibilities are one of the
following:
–Local
– Static
–Default
–OSPF Intra
–OSPF Inter
Table 9-32. Router Route Table Commands
CLI Command Description
show ip route Displays the routing table.
show ip route summary Shows the number of all routes, including best and non-best routes.