Filter
Top Products
184 Configuring System Information
Figure 6-55. Add RADIUS Server
3.
Enter an IP address and name for the RADIUS server to add.
4.
Click
Apply Changes
.
The new RADIUS server is added, and the device is updated.
Viewing RADIUS Server Status and Removing a Named Server
1.
Open the
RADIUS Server Configuration
page.
2.
Click
Show All
.
The
RADIUS Named Server Status
page displays.
Figure 6-56. RADIUS Server Status
3.
To remove a named server, select the check box in the
Remove
column.
4.
Click
Apply Changes
.
The RADIUS server is removed from the list.
Configuring RADIUS Server Settings Using CLI Commands
For information about the CLI commands that perform this function, see the
RADIUS Commands
chapter in the
CLI Reference Guide
. The following table summarizes the equivalent CLI commands you
use.