Filter
Top Products
122 Installing System Components
8
When the front of the card is fully seated, the plastic standoffs snap over
the edge of the card.
Figure 3-20. Installing or Removing an iDRAC6 Enterprise Card (Optional)
9
Replace the cooling shroud. See "Installing the Cooling Shroud" on
page 89.
10
Replace the expansion card stabilizer. See "Installing the Expansion Card
Stabilizer" on page 87.
11
Close the system. See "Closing the System" on page 86.
12
Reattach any peripherals and connect the system to an electrical outlet.
13
Turn on the system and attached peripherals.
1 iDRAC6 Enterprise card 2 VFlash media slot
3 VFlash SD card 4 retention standoff posts (2)
5 retention standoff tabs (2) 6 iDRAC6 Enterprise card connector
2
3
4
5
6
1
book.book Page 122 Wednesday, August 19, 2009 4:40 PM