Filter
Top Products
86 Installing System Components
Figure 3-5. Opening and Closing the System
Closing the System
1
Ensure that all internal cables are connected and folded out of the way.
2
Ensure that no tools or extra parts are left inside the system.
3
Place the bottom edge of the cover, opposite from the cover release latch,
into the slots in the system chassis. See Figure 3-5.
4
Lower the cover into the chassis.
5
Press the latch end of the cover into the chassis until the latch
locks into place.
6
Turn the lock on the cover release latch clockwise to the locked position.
See Figure 3-5.
1 cover release latch lock 2 cover release latch
3 system cover 4 chassis slots
1
2
4
3
book.book Page 86 Wednesday, August 19, 2009 4:40 PM