Filter
Top Products
Troubleshooting Your System 151
3
Disassemble components from the system. See "Installing System
Components" on page 79.
• Hard drives
•SD cards
• USB memory key
• Expansion cards
• iDRAC6 Express card
• iDRAC6 Enterprise card
• Expansion cards
• Power supplies
• System fan
• Processor and heat sink
• Memory modules
4
Let the system dry thoroughly for at least 24 hours.
5
Reinstall the components you removed in step 3.
6
Close the system. See "Closing the System" on page 86.
7
Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
If the system does not start properly, see "Getting Help" on page 177.
8
If the system starts properly, shut down the system and reinstall all of the
expansion cards that you removed. See "Installing an Expansion Card" on
page 115.
9
Run the appropriate online diagnostic test. See "Using Online Diagnostics"
on page 165.
If the tests fail, see "Getting Help" on page 177.
book.book Page 151 Wednesday, August 19, 2009 4:40 PM