Filter
Top Products
set ekahau
104 Chapter 2 Command Descriptions
set ekahau
Devices
supported
This command is supported in Digi Connect Wi-SP, Digi Connect Wi-ME,
and Digi Connect Wi-EM only.
Purpose Configures Ekahau Client
™
device-location software in a Digi Connect
wireless device.
The Ekahau Client feature provides integrated support for Ekahau's Wi-Fi
device-location solution on the Digi Connect Wi-ME, Digi Connect Wi-EM,
and Digi Connect Wi-SP products. Ekahau offers a complete access point
vendor-independent real-time location system for wireless LAN devices
that is capable of pinpointing wireless LAN devices such as the Digi
Connect products, laptops, PDAs, or other intelligent Wi-Fi enabled
devices. The solution provides floor-, room- and door-level accuracy of up
to 3.5 feet (1 m). The patented Ekahau positioning technology is based on
simple signal-strength calibration maps, and enables customers to fully
leverage an existing wireless LAN infrastructure without any need for
proprietary hardware components.
Please visit www.ekahau.com for additional information, including free
evaluation licenses for the Ekahau Positioning Engine and Ekahau Site
Survey software products.
Required
permissions
For Digi Connect products with two or more users, to use this command,
permissions must be set to one of the following:
• For a user to display Ekahau client settings: “set permissions
s-ekahau=read”
• For a user to display and set Ekahau client settings: “set permissions
s-ekahau=rw”
See "set permissions" on page 157 for details on setting user permissions
for commands.
Syntax
Configure Ekahau settings
set ekahau [state={on|off}]
[id=device id]
[poll_rate=seconds]
[protocol={tcp|udp}]
[port=port]
[server={hostname|ip address}]
[password=string]
[name=string]
Display current Ekahau settings
set ekahau