Filter
Top Products
status
254 Chapter 2 Command Descriptions
status
Devices
supported
This command is supported in all Digi Connect products.
Purpose Displays the current list of sessions. The “status” command displays the
status of outgoing connections (connections made by “connect,” “rlogin,” or
“telnet” commands). In contrast, the “display” command displays real-time
information about a device, while the “info” command displays statistical
information about a device over time. Typically, the “status” command is
used to determine which sessions to close.
Required
permissions
For Digi Connect products with two or more users, permissions must be set
to “set permissions status=read” or “set permissions status=rw” to use this
command. See "set permissions" on page 157 for details on setting user
permissions for commands.
Syntax status [range] [session number]
Options range
The range of sessions to view.
session number
An index number identifying the session number to view.
Examples #> status
Connection: 3 From: 10.8.109.8
Connection not associated with any sessions.
See also • "connect" on page 22
• "close" on page 21, for information on ending a connection.
• "display" on page 27
• "info" on page 41.
• "rlogin" on page 66
• "telnet" on page 255
• "who" on page 258