Filter
Top Products
set ethernet
108 Chapter 2 Command Descriptions
speed
Configures the Ethernet speed the Digi device will use on the Ethernet
network. Specify an appropriate setting for your Ethernet network, which
can be one of the following:
10
The device operates at 10 megabits per second (Mbps) only.
100
The device operates at 100 Mbps only.
auto
The device senses the Ethernet speed of the network and adjusts
automatically.
The default is “auto.” If one side of the Ethernet connection is using auto
(negotiating), the other side can set the Ethernet speed to whatever
value is desired. Or, if the other side is set for 100 Mbps, this side must
use 100 Mbps.
Examples Configure 100 Mbps Ethernet speed
#> set ethernet speed=100
See also • "set network" on page 149 to configure network communications
options.
• "revert" on page 61.
• "show" on page 249.