Filter
Top Products
set vncclient
226 Chapter 2 Command Descriptions
set vncclient
Devices
supported
This command is supported in ConnectPort Display only.
Purpose Configures or displays remote-access settings. Your ConnectPort Display
can provide remote access to a computer on the network or Internet using
the VNC (Virtual Network Computing) protocol.
VNC server software must be installed on the remote computer. A VNC
server is provided on your ConnectPort Display Software and
Documentation CD.
You can interact with the remote computer using a keyboard and mouse
connected to the USB ports on your ConnectPort Display.
Syntax Configure remote-access settings
set vncclient [state={on|off}]
[server=vnc server ipaddr|dns name]
[port=vnc server network port]
[password=vnc server password]
[reconnect=0-2000000 seconds]
[shared={on|off}]
[localcursor={on|off}]
[keepalive={on|off}]
Display current remote-access settings
set vncclient
Options state={on|off}
Enables or disables the connection to a remote computer’s VNC server.
server={vnc server ipaddr|dns name}
The VNC server’s IP address or DNS name.
port=vnc server network port
The network port number to connect to on the VNC server. The default
port number for VNC servers is 5900.
password=vnc server password
The password for logging on to the VNC server.
reconnect=0-2000000 seconds
The maximum amount of time to wait before attempting to reconnect to
the VNC server if the connection cannot be established or lost.
shared={on|off}
Specifies whether the VNC server desktop can be shared with other
clients. If “shared=on,” Other VNC clients can connect to the VNC server
while your ConnectPort Display is connected.
localcursor={on|off}
Enables or disables local mouse cursor handling. Tracking the mouse
cursor locally can improve mouse performance, especially with a slow
VNC server or slow network.