Filter
Top Products
mode
50 Chapter 2 Command Descriptions
mode
Devices
supported
This command is supported in Digi Connect Family products only and not
in Digi Cellular Family products or ConnectPort Display.
Purpose Changes or displays the operating options for a current Telnet session.
Required
permissions
For Digi Connect products with two or more users, permissions must be set
to “set permissions telnet=execute” to display or set Telnet operating
options. See "set permissions" on page 157 for details on setting user
permissions for commands.
Syntax Change Telnet options
mode [options]
Display Telnet options
mode
Options options
The operating options for a current Telnet session, which are as follows:
binary={on|off}
Enables or disables Telnet binary mode is enabled or disabled.
“binary=on” turns on binary mode, which means that all transmitted
and received characters are converted to binary during this Telnet
session. “binary=off” turns off binary mode off for this Telnet session.
The default is off.
crmod={on|off}
Specifies whether line feeds are added to received carriage returns.
“crmod=on” specifies that line feeds are added to received carriage
returns. “crmod=off” specifies that line feeds are not added to received
carriage returns. The default is off.
Examples
Turn on binary mode
#> mode binary=on
Add line feed characters
#> mode crmod=on
Display operating options
#> mode
See also "telnet" on page 255.