Filter
Top Products
set tcpserial
212 Chapter 2 Command Descriptions
set tcpserial
Devices
supported
This command is supported in all Digi Connect products.
Purpose Used to set behaviors of TCP serial connections, or display current TCP
serial settings.
This command affects the following TCP serial connections:
• Connections made using the autoconnect feature.
• Incoming network connections made to the following:
• The TCP server (raw socket, IP port 2101)
• The Telnet server (telnet socket, IP port 2001)
• Secure Sockets Layer (ssl socket, IP port 2601)
Required
permissions
For Digi Connect products with two or more users, to use this command,
permissions must be set to one of the following:
• For a user to display the TCP serial settings for the line on which they
are logged in: “set permissions s-tcpserial=r-self”
• For a user to display the TCP serial settings for any line:
“set permissions s-tcpserial=read”
• For a user to display and set the TCP serial settings for the line on
which they are logged in: “set permissions s-tcpserial=rw-self”
• For a user to display the TCP serial settings for any line, and set TCP
serial settings for the line on which the user is logged in:
“set permissions s-tcpserial=w-self-r”
• For a user to display and set the TCP serial settings on any line:
“set permissions s-tcpserial=rw”
See "set permissions" on page 157 for details on setting user permissions
for commands.
Syntax Set behaviors of TCP serial connections
set tcpserial port=range
[hangupdcd={on|off}]
[hangupdsr={on|off}]
[idletime={0|n}]
[sid={on|off}]
[sidstring=socketid string]
[buffered={on|off}]
[sendcount=1-65535 bytes]
[sendtime={0|1-65535ms}]
[endpattern=string]
[strippattern={on|off}
Display TCP serial settings
set tcpserial [port=range]