Digi 90000566_H Network Router User Manual


 
set profile
Chapter 2 Command Descriptions 173
Required
permissions
For Digi Connect products with two or more users, to use this command,
permissions must be set to one of the following:
For a user to display the profile settings for the line on which they are
logged in: “set permissions s-profile=r-self”
For a user to display the profile settings for any line: “set permissions s-
profile=read”
For a user to display and set the profile settings for the line on which
they are logged in: “set permissions s-profile=rw-self”
For a user to display the profile settings for any line, and set modem
emulation settings for the line on which the user is logged in:
“set permissions s-profile=w-self-r”
For a user to display and set the profile settings on any line:
“set permissions s-profile=rw”
See "set permissions" on page 157 for details on setting user permissions
for commands.
Syntax Configure port profile settings
set profile port=port profile=profile
Display current port profile settings for all available serial ports
set profile
Display current port profile settings for a particular serial port
set profile port=port
Options port=port
The serial port number or range of serial ports associated with the port
profile. Required when configuring port profiles.
profile=profile
The port profile to use for the serial port. Required when configuring port
profiles. Choosing a particular port profile causes the serial port’s
configuration to be reset to defaults, and then for the default settings for
that port profile to take effect.
Depending on the port-profile choices available for the device, the value
of “profile” can be one of the following:
console_management
Associates the Console Management port profile with the port. Not
supported in Digi Connect WAN.
local_config
Associates the Local Configuration port profile with the port.
modem_emulation
Associates the Modem Emulation port profile with the port. Not
supported in Digi Connect WAN.
realport
Associates the RealPort port profile with the port.