Filter
Top Products
display
30 Chapter 2 Command Descriptions
serial
Displays serial modem signals (DTR, RTS, CTS, DSR, DCD).
sockets
Displays information about how socket resources are being used by the
system.
spd
Displays Security Policy Database (SPD) entries defined for Virtual
Private Network (VPN) tunnels.
switches
Displays Multiple Electrical Interface (MEI) switch settings currently
currently defined for ports, on devices supporting MEI. (See
"set switches" on page 208.)
tcp
Displays active TCP sessions and active TCP listeners. To display more
TCP-related statistics, such as number of input and output bytes
transmitted, issue an “info tcp” command (see "info" on page 41).
udp
Displays current UDP listeners.
To display more UDP-related statistics, such as number of input and
output bytes transmitted, issue an “info udp” command (see "info" on
page 41).
uptime
Displays amount of time since the device was booted.
version
Displays boot, POST and EOS firmware version information and Digi part
numbers for those items.
vpn
Displays all VPN-related status information, including Security
Association (SA) database entries and Security Policy Database (SPD)
entries. Applies to Digi Cellular Family products only.
wlan
Displays typical wireless LAN (WLAN) parameters for Digi Connect
wireless devices.