Filter
Top Products
set user
Chapter 2 Command Descriptions 223
defaultaccess={none|commandline|menu|group}
Specifies the default access method and interface that a user will be
given upon logging into the device. Note that the specified interface must
be enabled for the user and have a valid menu and/or group if specified.
none
The user has no default access to the device and must explicitly
specify the access type. If the user and/or associated group has no
access rights then the user is not allowed to access either the
command line interface or the custom menu interface.
commandline
The user will be displayed and given access to the command line
interface assuming the user and/or associated groups have command
line access rights enabled.
menu
The user will be displayed and given access to the custom menu
interface and be displayed the custom menu as specified by the
“menu” option.
group
The user will be displayed the default access interface as specified by
the “defaultgroup” option, assuming the specified group is valid and
associated to this user. This allows the default access for a user to be
controlled by the associated group.
The default is “commandline.”
defaultgroup={none|gid|gname}
Specifies the default group to use when checking the default access
rights when the “defaultaccess” option is set to group. The specified
group must be valid and associated to the user.
none
The user will not be given any default access.
gid
The user will be given the default access method according to the
default access of the group with the specified gid.
gname
The user will be given the default access method according to the
default access of the group with the specified name.
The default is “none.”