display
36 Chapter 2 Command Descriptions
total link down requests
The number of times the SureLink feature has failed consecutively the
configured number of failures and, as a result, requested that PPP shut
down and restart its connection. This statistic counts such occurrences
during the current device boot. SureLink itself does do the PPP stop/start;
it sends a message to PPP asking it to do so, owing to a Surelink test
failure.
total bypasses
The total test bypasses (see “session bypasses”) since the Digi device
was rebooted.
See also • "info" on page 41.
• "show" on page 249 and "set wlan" on page 241. The "show wlan"
command displays additional wireless LAN information, including
wireless LAN settings configured by "set wlan" and evaluations of the
settings.
• "status" on page 254.
• "set vpn" on page 228 for information on the settings related to the
“sadb,” “spd,” and “vpn” options.