Filter
Top Products
set wlan
Chapter 2 Command Descriptions 243
Inner and outer protocols
The following table shows relationships between outer protocols and inner
protocols specified on the “set wlan” command. Outer protocols are the
types of Extensible Authentication Protocols (EAP) that are allowed to
establish the initial connection with an authentication server or access
point. The outer protocols are specified by the “outer_eap” option. Inner
protocols are the types of protocols that are allowed to authenticate the
device. These protocols are used within the encrypted connection
established by PEAP or TTLs. The inner protocols are specified by the
“inner eap” option.
Syntax Configure wireless settings
set wlan
[protmode={bss|ibss_create|ibss_join|any}]
[channel={0|1-14}]
[ssid=string]
[authentication={[open],[sharedkey],[wep_auth],[wpa_psk],
[wpa_auth],[leap],[any]}
[encryption={[open],[wep],[tkip],[ccmp],[any]}]
[outer_eap={[peap],[tls],[ttls],[any]}]
[inner_eap={[gtc],[md5],[mschapv2],[otp],[chap],[mschap],
[ttls_mschapv2],[pap],[any]}]
[options={[diversity],[short_preamble],[verify_cert]}]
[username=string]
[password=string]
[psk=string]
[wepmode={64bit|128bit}]
[wepindex=1-4]
[wepkeyN=hex string]]
[country=string]
[maxtxrate={1|2|5.5|11}] (Mbps)
[txpower={6|8|10|12|14|16}] (dBm)
Inner
Protocols:
Outer Protocols:
PEAP TLS TTLS
GTC X
MD5 X X
MSCHAPv2 X X
OTP X X
TLS X X
CHAP X
MSCHAP X
MSCHAPv2 X
PAP X