Filter
Top Products
set group
Chapter 2 Command Descriptions 115
set group
Devices
supported
This command is supported in Digi Cellular Family products Digi Connect
WAN and Digi Connect RG only.
Purpose Used to create and manage user groups. You can use “set group” to do the
following:
• Add a group. A maximum of 32 groups can be defined.
• Remove groups.
• Change group configuration attributes.
• Display group configuration attributes.
In order to apply a common set of user settings to more than one user, it
may be desirable to create a group with the required settings and then
associate that group with multiple users. If a user is a member of one or
more groups, the user's effective permissions are the maximum of the
permissions of the user and all of the groups to which the user belongs.
Required
permissions
For Digi Connect products with two or more users, permissions must be set
to “set permissions s-group=read” to display group configuration attributes,
and “set permissions s-group=rw” to display and set group configuration
attributes. See "set permissions" on page 157 for details on setting user
permissions for commands.
Syntax Add a group
set group add id=number newname=string
Remove a group
set group remove {id=range|name=string}
Change group configuration attributes
set group {id=range|name=string} [newname=string]
[commandline={on|off}] [menu={none|index|name}]
[defaultaccess={none|commandline|menu}]
Display group configuration attributes
set group {id=range|name=string}
Display group configuration attributes for all groups
set group
Options add
Add a group. New groups are created with no permissions. A maximum
of 32 groups can be defined.
remove
Remove groups.
id=range
Specifies the ID or range of IDs of the groups to be acted on.