Filter
Top Products
set wlan
248 Chapter 2 Command Descriptions
psk=string
Used when the “security” option is set to “wpa_psk.” This option specifies
a string that is converted into a pre-shared key (PSK) that is used for
encryption.
wepmode={64bit|128bit}
Specifies the key size used when WEP encryption is enabled. The default
is 64bit.
wepindex=1-4
Specifies which of the 4 possible keys will be used. The default is 1.
wepkeyN=hex string
A hexadecimal string that serves as the key if WEP encryption is enabled.
The key consists of 26, 10, or 0 (zero) hexadecimal digit characters. If
“wepmode=64bit”, the wepkey is 10 digits. If “wepmode=128bit”, the
wepkey is 26 digits. A wepkey value of 0 length clears the value.
country=string
The country in which the device will be used. By selecting a country, the
channel settings will be restricted to the legal set for that country.
maxtxrate={1|2|5.5|11} (Mbps)
The maximum transmission rate that the device will use, in megabits per
second.
txpower={6|8|10|12|14|16} (dBm)
The wireless transmit power, in decibels relative to one milliwatt (dBm).
Example #> set wlan wepkey1=ab12cd34ef567ab12cd34ef567 wepindex=1
#> set wlan wepmode=128bit
#> set wlan ssid="access point 1"
See also • "revert" on page 61. The “revert wireless” option reverts the settings
configured by this command.
• "show" on page 249. "show wlan" displays