Filter
Top Products
Upgrading the Access Point Software 111
6 Managing and Maintaining D-Link Access Points
After you provide the information about the upgrade file, click Start to begin the upgrade
process. Additional fields appear to provide information about upgrade status and success.
Figure 53. AP Upgrade Status.
Group Size When you upgrade multiple APs, each AP contacts the TFTP server to
download the upgrade file. To prevent the TFTP server from being
overloaded, you can limit the number of APs to be upgraded at a time.
In the Group Size field, enter the number of APs that can be upgraded at the
same time. When one group completes the upgrade, the next group begins
the process.
Managed AP The drop-down menu lists the APs that the switch manages. Each AP is
identified by its MAC address. To upgrade a single AP, select the AP MAC
address from the drop down list. To upgrade all APs, select “All” from the
top of the list. If “All” is selected, the Group Size field will limit the number
of simultaneous AP upgrades in order not to overwhelm the TFTP server.
NOTE: We recommend that you upgrade all managed APs at the same time.
Table 19. AP Upgrade
Field Description