Filter
Top Products
Default D-Link WLAN Controller Switch Settings 175
A
D-Link Unified Access System Default
Settings
This chapter identifies the default values for the D-Link WLAN Controller Switch and the
default AP Profile setting that the switch assigns to the AP after it is discovered and
authenticated (when the AP uses the default profile).
Default D-Link WLAN Controller Switch Settings
Table 58 shows the default settings for the D-Link WLAN Controller Switch
Table 58. Switch Defaults
Feature Default
System Information
User Name admin
Password None
Network Information
DHCP Client Disabled
Network Configuration Protocol None
IP Address 10.90.90.90
Subnet Mask 255.0.0.0
802.1Q Enabled
Management VLAN ID 1
Untagged VLAN ID 1
Spanning Tree Protocol Enabled