Filter
Top Products
118 © 2001- 2006 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
D-Link Unified Access System User Manual
For more information about an item on the Wireless Global Status page, click the value
associated with the item to go to its status page.
Figure 55. Global WLAN Status
Table 24 describes the fields on the Wireless Global Status page.
Table 24. Global WLAN Statistics
Field Description
WLAN Switch
Operation Status
This status field displays the operational status of the WLAN Switch. The
WLAN Switch may be configured as enabled, but is operationally disabled
due to configuration dependencies. If the operational status is disabled, the
reason will be displayed in the following status field.
The WLAN Switch is composed of multiple components, and each
component in the system must acknowledge an enable or disable of the
WLAN Switch. During a transition the operational status might temporarily
show a pending status.
IP Address IP address of the switch. For information about the switch IP address, see
“Assigning the IP Address to Switches and Managed APs” on page 60.
Peer Switches Number of peer WLAN switches detected on the network.
Total Access
Points
Total number of Managed APs in the database. This value is always equal to
the sum of "Managed Access Points," "Connection Failed Access Points,"
and "Discovered Access Points."
Managed Access
Points
Number of APs in the managed AP database that are authenticated,
configured, and have an active connection with the wireless switch.