Filter
Top Products
Default D-Link Access Point Profile Settings 177
D-Link Unified Access System Default Settings
Radio Settings
Radio (1 and 2) On
Radio 1 IEEE 802.11 Mode 802.11b/g
Radio 2 IEEE 802.11 Mode 802.11a
NOTE: If the AP operates in a regulatory domain
where 802.11a is not supported, the radio is disabled
and no mode is configured.
RF Scan Other Channels Enabled
RF Scan Interval 60 seconds
RF Scan Duration 10 milliseconds
Super AG Disabled
Extended Range Disabled
Automatic Channel Enabled
Automatic Power Enabled
Initial Power 100
Load Balancing Disabled
Load Utilization 60%
Maximum Clients 256
RTS Threshold 2347 bytes
DTIM Period 10 beacons
Fragmentation Threshold 2346 bytes
Beacon Period 100 milliseconds
Rate Limiting Disabled
Rate Limit 50 packets/second
Rate Limit Burst 75 packets/second
Rate Sets
Supported (Mbps)
IEEE 802.1a: 54, 48, 36, 24, 18, 12, 9, 6
IEEE 802.1g: 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1
IEEE 802.1b: 11, 5.5, 2, 1
Atheros Turbo 5 GHz: 108, 96, 72, 48, 36, 24, 18, 12
Rate Sets (Mbps)
(Basic/Advertised)
IEEE 802.1a: 24, 12, 6
IEEE 802.1g: 11, 5.5, 2, 1
IEEE 802.1b: 2, 1
Atheros Turbo 5 GHz: 48, 24, 12
Table 59. AP Default AP Profile Settings
Feature Default