Filter
Top Products
176 © 2001- 2006 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
D-Link Unified Access System User Manual
Default D-Link Access Point Profile Settings
Table 59 shows the AP settings for the default profile. By default, when a D-Link Access
Point associates with the switch, the settings in this table are assigned to the AP upon
successful AP validation.
WLAN Information
Wireless Switch Mode Enabled
AP Authentication Disabled
AP Validation Local
Country Code US
Default Profile Name Default
Peer Switch Group ID 1
L2 (VLAN) /L3 (IP) Discovery Enabled
SNMP Traps Disabled
Client Roam Timeout 30 seconds
Ad Hoc Client Status 24 hours
AP Failure Status 24 hours
Client Failure Status 24 hours
RF Scan Status 24 hours
Table 59. AP Default AP Profile Settings
Feature Default
System Information
User Name admin
Password admin
Network Information
DHCP Client Enabled
Management IP Address 10.90.90.91 (If not assigned by DHCP)
Subnet Mask 255.0.0.0 (If not assigned by DHCP)
Management VLAN 1
Untagged VLAN 1
Table 58. Switch Defaults
Feature Default