28 © 2001- 2006 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
D-Link Unified Access System User Manual
6. To enable encryption, use the Encryption Protocol pull-down menu to select DES for the
encryption scheme. Then, enter an encryption code of eight or more alphanumeric
characters in the Encryption Key field.
7. Click Submit.
To access configuration information for SNMPv1 or SNMPv2, click LAN > Administration
> SNMP Manager and click the page that contains the information to configure.
Wireless System Features and Standards Support
In addition to core switching features, the D-Link WLAN Controller Switch supports the
following features and standards:
• IP Tunneling
• Spanning Tree
• Auto detection and configuration of APs
• Automatic Peer-Switch Discovery
• Automatic or Manual RF Channel Assignment
• Automatic or Manual AP Power Adjustment
• AP Authentication
• Client Authentication
• Load Balancing
• RF Scan and AP Sentry Mode
• Broadcast/Multicast Rate Limiting
• Dual Radio Support
• Multiple Mode Support for Radios:
- IEEE 802.11a
- IEEE 802.11b
- IEEE 802.11g
- Atheros Turbo 5 Ghz
- Atheros Dynamic Turbo 5Ghz
- Atheros Turbo 2.4 Ghz
- Atheros Dynamic Turbo 2.4 Ghz
• IEEE 802.11h (TPC & DFS)
• Security Standard Support:
- WEP (64, 128)
-WEP (152)
-TKIP
- AES & CCMP
- Inhibit / Ignore SSID broadcast
-WPA (Personal)
- WPA (Enterprise)
- WPA2 (Personal) 802.11i
- WPA2 (Enterprise) 802.11i
• MAC Authentication
• Multiple BSSID/VLANs
• Security and Authentication Settings per SSID
• VLAN Support
• IEEE 802.11d (Country Code)