Filter
Top Products
Monitoring Managed Access Point Status 123
7 Monitoring Status and Statistics
Monitoring Managed Access Point Status
From the Monitoring > Access Points > Managed Access Points page, you can access a
variety of information about each AP that the switch manages. The pages you access from the
Status tab provide configuration and association information about managed APs and their
neighbors. The pages you access from the Statistics page display information about the
number of packets and bytes transmitted and received on different interfaces.
Figure 59 shows the Managed Access Point Status page with three managed APs.
Figure 59. Managed AP Status
The following tabs are available from the Managed AP Status page:
• Summary—Lists the APs managed by the switch and provides summary information
about them.
• Detail—Shows detailed status information collected from the AP.
• Radio Summary—Shows the channel, transmit power, and number of associated wireless
clients for all managed APs.
• Radio Detail—From the Radio Summary page, click the MAC address of the AP to view
detailed status for a radio interface. Use the radio button to navigate between the two radio
interfaces.
• Neighbor APs—Shows the neighbor APs that the specified AP has discovered through
periodic RF scans on the selected radio interface.
• Neighbor Clients—Shows information about wireless clients associated with an AP or
detected by the AP radio.
• VAP—Shows summary information about the virtual access points (VAPs) for the
selected AP and radio interface on the APs that the switch manages.
Table 27 describes the fields you see on the Summary page for the managed access point
status.
Table 27. Managed Access Point Status
Field Description
MAC Address The Ethernet address of the WCS managed AP.
Location A location description for the AP. This is the value configured in the valid
AP database (either locally or on the RADIUS server).