Epson 100-88002 Printer User Manual


 
Control Codes
Page 116 100-88002 Rev B
[ESC] Y Print full-speed double-density graphics (120h x 72v dpi)
ASCII [ESC] Y <n
1
> <n
2
>
Hexadecimal 1BH 59H <n
1
> <n
2
>
Decimal <27> <89> <n
1
> <n
2
>
IPCL none
Description The [ESC] Y <n
1
> <n
2
> command prints <n
1
> + 256 * <n
2
> bytes of
double-density graphics (120 dpi) at full speed with no consecutive dots. (The mode
is generally used to print 120h by 144v dpi resolutions in two passes).
[ESC] Z Print quad-density graphics (240h x 72v dpi)
ASCII [ESC] Z <n
1
> <n
2
>
Hexadecimal 1BH 5AH <n
1
> <n
2
>
Decimal <27> <90> <n
1
> <n
2
>
IPCL none
Description The [ESC] Z <n
1
> <n
2
> command prints <n
1
> + 256 * <n
2
> bytes of quad-
density graphics (240 dpi) at half speed with no consecutive dots. (The mode is
generally used to print 240h by 144v dpi resolutions in two passes).
Extended APA Graphics
[ESC] * Print graphics in mode <m> (60h/ 120h/ 240h x 72v dpi)
ASCII [ESC] * <m> <n
1
> <n
2
>
Hexadecimal 1BH 2AH <m> <n
1
> <n
2
>
Decimal <27> <42> <m> <n
1
> <n
2
>
IPCL none
Description The [ESC] * <m> <n
1
> <n
2
> command selects the graphic resolution
graphic modes as specified by <m>.
Where <m>
Mode Resolution
0 60 dpi
1 120 dpi
2 120 dpi
3 240 dpi
4 80 dpi
5 72 dpi
6 90 dpi
Mode Resolution
7 144 dpi
8,9 Not supported
10 102 x 102 dpi
11 203 x 102 dpi
12 102 x 203 dpi
13 203 x 203 dpi
15,16 Not supported
[ESC] ? Reassign graphic mode
ASCII [ESC] ? <m> <n>
Hexadecimal 1BH 3FH <m> <n>
Decimal <27> <63> <m> <n>
IPCL none