Filter
Top Products
Control Codes
100-88002 Rev B Page 173
unsigned int Error Vectors;
unsigned int Auto Cutter Faults;
unsigned int Power On Time;
unsigned int System Active Time;
unsigned int Head Over Temps;
unsigned int Cutter Re-Home;
unsigned int Jam Detect L1;
unsigned int Jam Detect L2;
unsigned int Missed Top of form;
unsigned int Configuration Faults;
unsigned int Not used;
unsigned int Flash File Fault;
unsigned int Jam Detect L3;
unsigned int Retracts;
unsigned int USB Watch Dog;
unsigned int RAM Faults;
[ENQ] <33> Inquire Firmware ID and Rev.
ASCII [ENQ] <33>
Hexadecimal 05H 21H
Decimal <5> <33>
Function The [ENQ] <33> command returns the Firmware ID and revision.
Response [ACK] <33> <51> PE8805-X.XX.
Where
<33> Is the echo of command
<51> Length + 40
Firmware ID PE8805
Separator - (0x2D or 45D)
Rev X.XX (Current Revision in ASCII)
[ENQ] <34> Inquire Firmware CRC.
ASCII [ENQ] <34>
Hexadecimal 05H 22H
Decimal <5> <34>
Function The [ENQ] <34> command returns the Firmware ID and revision.
Response [ACK] <34> <42> <MSB> <LSB>
Where
<34> Is the echo of command
<42> Length + 40
<MSB> Most significant 8 bits of the 16 bit CRC
<LSB> Least significant 8 bits of the 16 bit CRC