Epson 100-88002 Printer User Manual


 
Control Codes
Page 124 100-88002 Rev B
User Store Commands
Function Load item from user store
ASCII [ESC] [US] l <Name..> <0>
Description If the item referenced is a user-defined character set, it is loaded into the
current definition. If it is a macro, it is loaded into the macro buffer. It is not processed
or printed.
To help maintain the user-store area, the following commands can be used.
The terminating <0> may be replaced with an & or redefined. See [ESC] [EM]T<n> or
&%UT<n> on page 128.
Function Flag as a start-up macro
ASCII [ESC] [US] s <Name..> <0>
Description The [ESC] [US] s <Name..> <0> command flags the referenced item to
be processed at startup. No more than one user character definition and user data
item may be flagged.
The terminating <0> may be replaced with an & or redefined. See [ESC] [EM]T<n> or
&%UT<n> on page 128.
Function Remove item from user store
ASCII [ESC] [US] e <Name..> <0>
Description The [ESC] [US] e <Name..> <0> command removes an item from user
store and frees up its space. The terminating <0> may be replaced with an & or
redefined. See [ESC] [EM]T<n> or &%UT<n> on page 128.
Function Flush information from user store
ASCII [ESC] [US] f ALL <0> Base User Store
or [ESC] [US] f EXT <0> Extended User Store.
Description The [ESC] [US] f ALL <0> command clears all of the information to the
user store and frees the data space. The [ESC] [US] f EXT <0> command clears all of
the information in the extended the user store.
The terminating <0> may be replaced with an & or redefined. See [ESC] [EM]T<n>
or &%UT<n> on page 128.
Function Report on user store
ASCII ESC] [US] q <0>
Description The [ESC] [US] q <0> prints or returns information about the contents of
and available space in user store.
The terminating <0> may be replaced with an & or redefined. See [ESC] [EM]T<n>
or &%UT<n> on page 128.
Note: A configuration option is available that locks the user store data. The
configuration option prevents the occurrence of new user store data
operation until the lock is manually reset and accidental deletion of the saved
information. The user-defined character buffer and/or user data buffer may
be redefined and used but cannot be stored.