Filter
Top Products
Configuring Your Epic 880
TM
Printer
100-88002 Rev B Page 41
Field Configuration Feature
A field configuration feature allows easy setup and configuration of your Epic 880
printer. This feature provides a one-time prompt, on initial power-up, that lets you
select from a number of configurations that are pre-loaded for you at the factory.
This feature is an option, and must be set up and activated by TransAct. It stores a
specified number of complete, commonly-used configurations in the printer, together
with a text description and configuration summary.
Using Field Configuration
When the FEED button is pressed for over 6 seconds, the printer will either enter field
configuration mode or comprehensive configuration mode, depending on whether the
field configuration feature is present.
The initial print out will be as shown in Figure 7:
Figure 7. Startup message in Field Configuration mode.
Note: The “x” value shown in this figure will be the actual number of loaded
configurations, and can range from 2 to 20.
The first option presented is an option to print all the stored configurations in summary
form. Press and hold the FEED button after this option is displayed to select it. This
summary includes the configuration name, a text description and a brief list of
features for each pre-loaded configuration.
After the “Print all option”, each configuration is sequentially presented by name with
its description. Press the FEED button once to move to the next configuration in the
There are x
stored configurations
to select from.
Press and release FEED
to move between options.
Press and hold the
FEED button to select
an option.
Press DIAG Button
Or Cycle Power
To Exit